Sharp LC-32L450X Operation Manual page 11

Programme setup (Continued)
The item position of services can be sorted
1 Press a / b to select the service whose item
position you want to move, and then press B.
DTV 005 Maori Television
DTV 022 Parliament TV
DTV 100 Freeview I HD
2 Press a / b to move it to the desired position, and
then press ENTER.
DTV 100 Freeview I HD
DTV 022 Parliament TV
DTV 005 Maori Television
3 Repeat steps 1 and 2 until all desired service
items are sorted.
Analogue settings
H Auto search (Analogue)
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Analogue programme
3
setup", and then press ENTER.
4
If you have already set the password, enter it
here.
• See page 12 for setting a password.
Press a / b to select "Auto search", and then
5
press ENTER.
6 Press c / d to select "Yes", and then press
ENTER.
Press a / b to select the desired sound
system, and then press ENTER.
You do not need to do anything during the
auto search. Press MENU to exit.
H Manual adjust (Analogue)
You can set some channel item manually.
Repeat steps 1 to 4 in Auto search.
1
Press a / b to select "Manual adjust", and
2
then press ENTER.
Press c / d to select "Yes", and then press
3
ENTER.
Press a / b / c / d to select the channel you
4
want to edit, and then press ENTER.
• The selected channel information displays.
Press a / b to select the desired menu, and
5
then press ENTER.
Press a / b or c / d to select the desired item
6
or adjust the item to the desired level. Press
ENTER if necessary.
Search
The next channel will be search in order.
Fine
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c / d to adjust the frequency, you can
set by directly entering the frequency number of the channel
with 0 — 9.
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
Colour system
Select the optimum colour system to receive. (Auto,
PAL, SECAM, NTSC 4.43, PAL-60)
Sound system (Broadcasting system)
Select the optimum sound system (Broadcasting
system) to receive. (B/G, D/K, I)
Label
To enter the name of the channel. Maximum 5
alphanumeric can be input.
• Press a / b / c / d : To select a desired alphanumeric, and
then press ENTER.
Repeat until the name is fully spelt out.
Search
Fine
Colour system Auto
[ ]
Sound system [ B/G ]
Label [ ]
[ Off ]
Booster
Skip [ Off ]
Lock [ Off ]
• To exit, select END and then press ENTER.
• If the wrong alphanumeric is entered, select CLEAR to
clear, and then press ENTER.
Booster
Enhance the picture quality during weak signal. It is
not recommended to turn on during strong signal
condition. It may induced unwanted noise. (On, Off)
Skip
Channels with "Skip" set to "On" are passed over when
using CH r / s even if selected while watching the image
from the TV.
Lock
You can block the viewing of any channel.
NOTE
• See "Child lock" for setting a password.
• If "Lock" is set to "On" for a channel, "Child lock has been
activated" is displayed when you select the channel, and the
image and sound of the channel is blocked.
• When pressing ENTER while "Child lock has been activated"
is displayed, password input menu will be displayed. Inputting
the correct password lifts the child lock temporarily until the
power is turned off.
Broadcasting station name settings
A B C D E F G H I J CLEAR
KLMNOPQRST BACK
U V W X Y Z + – . _
0 1 2 3 4 5 6 7 8 9 END
9