Touch Pen Actions; Adding Touch Pens (Pairing) - Sharp PN-L803CA Operation Manuals

Touch Panel / Touch Pen Preparations

Touch pen actions

Only use touch pens that are used with this monitor (supplied
touch pens or optional PN-ZL03A).
Function button 1
Pen tip
LED
The factory default settings for the function buttons are as follows.
• Function button 1 : Pen Software Link
• Function button 2 : PageDown
• Function button 3 : PageUp
You can change the functions that are assigned to the function
buttons. For details, see the Touch pen Management Tool
Operation Manual.
Using as a digitizer pen
A touch pen can be used as a Windows digitizer pen.
To use a touch pen as a digitizer pen, change the "Touch
Operation Mode Setting" to "Pen digitizer Mode" in the
Touch pen Management Tool. For details, see the Touch pen
Management Tool Operation Manual.
TIPS
• Hold the touch pen at the part indicated below. Incorrect
operation may result if your finger is too close to the tip of
the pen.
• When the function button is pressed, the LED illuminates.
If the LED does not illuminate, check if the battery is depleted.
• If the LED blinks orange, the battery is low.
• If not connected to the touch pen adapter, the LED will blink
light blue.
• Use function buttons near the front of the screen. If too far
away, operation will not be possible.
• Press function buttons slowly and firmly. If pressed too
quickly, the action may not be recognized.
• The line may break if the touch pen battery is low or there
is other wireless equipment in operation nearby.
• If the pen tip becomes damaged and the touch panel does
not respond, replace the pen tip.
* When inserting the touch pen tip, insert firmly all the way
in.
• The pen tip is made soft to protect the screen and improve
writability. For this reason, the pen tip may become deformed,
however, this is not a failure.
• The touch pens cannot be used as touch pens and digitizer
pens at the same time. When the setting is changed in the
Touch pen Management Tool, all touch pens become digitizer
pens. Multiple digitizer pens cannot be used at the same time.
20
E
Function button 2
Function button 3
nTouch pen settings
Touch pen settings are configured using the Touch pen
Management Tool. For details on the settings and how to use
the utility, see the Touch pen Management Tool Operation
Manual.

Adding touch pens (pairing)

• Up to 4 touch pens can be used simultaneously. (Up to 8
touch pens can be registered.)
Item Model
Touch pen PN-ZL03A
• To use an optional touch pen with the monitor, the touch
pen must be registered in the touch pen adapter. (pairing)
• Use the Touch pen Management Tool to perform touch pen
pairing. For details, see the Touch pen Management Tool
Operation Manual.
• Perform touch pen pairing for one pen at a time.
TIPS
• When multiple touch pens are used, touch positions and
touch pen information (color, thickness, etc.) may become
interchanged, and lines may break.
- When touched simultaneously
- When touch pens are moved near each other
- When batteries are low
- When other wireless equipment is operating nearby
• Do not press the pen tip on other than the screen.
This may cause malfunctioning.
• One touch pen cannot be registered in multiple touch pen
adapters.
Remarks
For capacitive touch panel