Table of Contents
Advertisement
o. SNS log information is limited to Alarm Log messages and Operational Log messages.
Click the Log button and a Log screen with tabs for Alarm Log and Operational Log
appears.
p. For Remote Device Configuration click the DeviceCFG button. Allows the SNS remote
configuration of the DVR's settings for
Recording;
o
Alarms; Video Motion, Video Blind, Video Loss and Alarm Input;
o
System Setup: General, Encode, Network, NetService, CAM Name and PTZ
o
Config
Advanced: Account, AutoMaintain, Default and Reboot
o
Info: HDD Info, Log and Version
o
The settings process using SNS is very similar to using the DVR's menus.
When done with each setting be sure to click OK or APPLY to save the configuration.
A sample of one of the Remote Config screens is below.
v2.0 11/8/11
91
Advertisement
Table of Contents
