Remote Management Using Client Software; Cms Software Installation - Security Tronix ST-DVR8716BG User Manual

REMOTE MANAGEMENT USING CLIENT SOFTWARE

Using the included DVR client software it is possible to remotely configure and control the DVR
over a LAN, WAN or via the Internet. Although the guide below will provide the user with the basic
instructions for remote management, it is important to stress that success is dependent upon the
proper network settings and network access privileges associated with the DVR's location. In
some instances a Virtual Private Network (VPN) may be necessary to gain access to the DVR
from a distant location.
Note: This DVR comes with two versions of Remote Management Client software: (a) Center
Manager System (CMS) and (b) Super NetSurveillance (SNS). Functionally, both are very similar.
It may be a matter of personal preference which software is selected.

1. CMS SOFTWARE INSTALLATION

To install the software on a Microsoft Windows PC:
a. Place the included CD in the PC's CD or DVD drive and run. A screen similar to the one
below will appear.
b. Click the Software folder. A screen similar to the one below will appear. The folder
contains the following software:
 CMS remote management software
 SNS (Super NetSurveillance) remote management software
Player – A video file player

 Active X plug-in
 Mobile Monitor – Software for remote DVR access and management using Symbian
and Microsoft Windows Mobile Smartphones. This software has not been field-tested.
v2.0 11/8/11 63