Advertisement
SECTION 3
Using Your Brewer
Brewing Over Ice
Prepare Your Cup
Fill a 16 oz. plastic cup with ice. Do not use glass.
Remove the Drip Tray if necessary and place cup
under the Brew Head.
Choose Vue
Make sure your Vue
features the Brew Over Ice Icon.
Lift the Handle, insert
the Vue
and lower the Handle.
Select Beverage Type & Size
Select the "Brew Over Ice" button. The Touchscreen
will display as pictured.
Select the desired beverage type.
Select your beverage size using the + and - buttons
at the bottom of the Touchscreen.
* Available sizes for Iced Coffee and Iced Tea/Other
are 6 oz., 8 oz. and 10 oz.
* Available sizes for Iced Café are 6 oz. and 8 oz.
Available Sizes*
Press
Do not remove mug or lift the Handle until "Enjoy!"
disappears from Touchscreen.
Remove the Vue
The Vue
removing. Allow it to cool completely before handling.
14
Pack
®
pack
®
pack into the Holder
®
& Enjoy!
pack after brewing is complete.
®
pack will be HoT after brewing. Use caution when
®
What is a Cleansing Brew?
After brewing certain Vue
pack varieties such as hot
®
cocoa, iced tea or a café beverage, we recommend
performing a cleansing brew as follows:
Step 1 Take a used Vue
pack and peel off the lid. Discard
®
the lid and any filter which adheres to it. Ensure the
empty Vue
pack cup is clean.
®
Step 2 Place the EMPTY Vue
®
pack cup in the brewer and
place a mug on the Drip Tray.
Step 3 Lower the Handle, then press "BREW." The brewer
will dispense 8 oz. of hot water into your mug.
Once complete, discard the water and carefully
remove the Vue
pack cup. The cleansing is
®
complete.
Stopping the Brewing Process
If you need to stop the brewing process after it has started,
press and release the Power Button to turn the brewer off.
The beverage flow will stop and the brewer will shut off.
The Vue
®
pack will be HoT after brewing. Use caution when
removing. Allow it to cool completely before handling.
When turning the brewer back on, place an empty mug
toward the back of the Drip Tray and press the Power
Button. Since the previous brew was interrupted, some
water may drip into the mug during preheating.
We recommend that you perform a cleansing brew before
brewing your next beverage (see above). If this is not done,
the brewer may deliver an additional amount of water for
your next beverage.
Dispensing Hot Water
If you need hot water for cooking (instant soup or oatmeal,
for example), place a cup or bowl below the Brew Head.
Place your cup or bowl toward the back of the Drip Tray.
Lift and lower the Handle WITHOUT inserting a Vue
Select "Coffee" (do not select "Strong") and your desired cup
size and then press "BREW." The brewer will dispense hot
water into your cup or bowl.
SECTION 3
Using Your Brewer
Step 1
Step 2
Step 3
®
pack.
15
Advertisement
