Screen Size Adjustment - Christie LWU505 User Manual

Computer Input
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select yes. All adjustments will return to their previous
figures.
Store
To store the adjusted data, select Store and press the
Point ► or the SELECT button. Use the Point ▲▼ buttons
to select one from Image 1 to 10 and press the SELECT
button.
A confirmation box appears and then select yes. Stored
data can be called up by selecting an Image (1-10) in the
Image Mode Selection on page 40.
Select the desired screen size that conforms to the input
signal source.
1 Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Screen
and then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons select the desired item
2
and then press the SELECT button.
Normal
Provide the image within a screen size keeping its original
aspect ratio.
Full
Provide the image to fit full screen size.
Wide (16:9)
Provide the image at the 16:9 wide screen ratio.
Zoom
Scale the image proportionally to fit the entire screen.
Either side of image may go over the screen.
True
Provide the image in its original size. When the original
image size is larger than the panel size (1920 x 1200),
and 16:9 or 4:3 is selected in Screen aspect, the
projector goes to the panning mode automatically. Use
the Point ▲▼◄► buttons to pan the image. When
adjusted, the arrows will turn red. When reaching to
the correction limits, the arrows will disappear.
Custom
Provide the last stored aspect screen image.
42

Screen Size Adjustment

Store
A confirmation box appears
and then select yes.
SCREEN MENU
Note:
• The projector cannot normally display
any resolution higher than 1920 x
1200. If your computer's screen
resolution is higher than 1920 x 1200,
lower the resolution before connecting
the projector.
• The image data other than 1920 x
1200 is modified to fit the screen size in
initial mode.
• Full, Zoom, True, Custom adj. and
Digital zoom +/– cannot be selected
when no signal is detected in the PC
System Menu. (p.36)
020-000374-0
LWU505 User Manual