Removing The Broil Element - LG LRE30451SW Service Manual

REMOVING THE BROIL ELEMENT

REMOVING THE BROIL ELEMENT
!
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electrical
shock.
! CAUTION
When you work on the electric range, be careful
when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from
inside the oven.
3. To remove the broil element:
a) Remove the 4 screws from the front and rear
brackets.
2 Upper bracket Screws
2 Rear bracket Screws
COMPONENT ACCESS
b) Pull the element forward so that you can
access the terminals and disconnect the wires.
3-6
Terminals
2