Brother ADS-2600W Quick Setup Manual page 27

For Wireless Network Users
The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.
If you would like to configure your wireless settings using WPS or AOSS™, you must operate
both your machine and the wireless access point/router.
Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.
TS-07
If you do not know how to operate your wireless access point/router
using WPS or AOSS™ see the documentation provided with your
wireless access point/router, ask the manufacturer of your wireless
access point/router or ask your network administrator.
Two or more wireless access points that have WPS or AOSS™ enabled are detected.
- Confirm that only one wireless access point/router within range has the WPS or AOSS™
TS-08
method active and try again.
- Try starting again after a few minutes in order to avoid interference from other access
points.
Note
If the error code TS-20 appears, the machine is still trying to connect to your wireless network. Please wait a
few minutes, and then check the WLAN status from the control panel of the machine.
27