Readlongintegerarray - Crestron SIMPL+ Reference Manual

Crestron SIMPL+
Language Reference Guide - DOC. 5797G
®

ReadLongIntegerArray

Name:
ReadLongIntegerArray
Syntax:
SIGNED_INTEGER ReadLongIntegerArray ( INTEGER
file_handle,
LONG_INTEGER ilArray[m][n] )
Description:
Reads the array from a file starting at the current file position. Two bytes are read,
most significant first containing the row dimension of the array, then two more bytes
are read, containing the column dimension of the array. Then each long integer is read
as a four byte quantity, most significant byte first. The integers are stored in row-
major order, e.g. all the elements of row 0 first, then the elements of row 1, etc. Note
that there is one more row and one more column than the dimensions that are read,
because there is a row 0 and a column 0. Refer to the section entitled "Reading and
Writing Data to a File" on page
when to use the related functions: FileRead, ReadInteger, ReadString, ReadStructure,
ReadSignedInteger, ReadLongInteger, ReadLongSignedInteger, ReadIntegerArray,
ReadSignedIntegerArray, ReadLongIntegerArray, ReadLongSignedIntegerArray,
ReadStringArray.
NOTE: Input and Output variables of any kind are not allowed in the file read
functions.
An error occurs if the array is not long enough to hold the data.
Parameters:
FILE_HANDLE specifies the file handle of the previously opened file (from
FileOpen).
ilArray is the array whose values are read.
Return Value:
Number of bytes read from file. If the return value is negative, it is an error code.
118 for a discussion of when to use this function and
Software
®
SIMPL+ 165