Yamaha 2010 YZF-R125Y Owner's Manual page 43

Cowling C
To remove the cowling
Remove the screws, and then pull the
cowling off as shown.
1. Screw
2. Cowling C
To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.
Cowling D
To remove the cowling
1. Remove panel A, cowlings A, B
and C.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18852 2. Remove the screws and the quick
fasteners, and then take the cowl-
ing off.
TIP
The quick fastener is removed by push-
ing the center pin in with a screwdriver,
then pulling the fastener out.
1. Quick fastener
2. Screw
3. Cowling D
To install the cowling
EAUM2361
1. Place the cowling in the original
position, and then install the
screws and the quick fasteners.
TIP
To install the quick fasteners, push the
center pin out so that it will protrude
from the fastener head, insert the fas-
tener into the cowling, and then push
the protruding pin in until it is flush with
the fastener head.
2. Install cowlings C, B, A and panel
Panel A
To remove the panel
1. Remove the rider seat. (See page
2. Remove the screws, and then take
7-8
A.
4-10.)
the panel off.
EAUM2370
7