Table of Contents
Advertisement
2. Immediately touche the necessary heat setting. After 3 seconds
display.
To stop the function change the heat setting.
Switching on and off the power function
The power function gives more power to an induction cooking zone for no longer than 10
minutes. After that time, the induction cooking zone automatically sets back to
start it , touch
Power management
The power management divides the power be-
tween two cooking zones in a pair (see the figure).
The power function increases the power to the
maximum level for one cooking zone in the pair
and automatically decreases in the second cook-
ing zone to a lower power level. The display for
the reduced zone alternates.
Using the Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for one cooking
session.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• Selection of the cooking zone: touch
necessary cooking zone comes on.
• Starting the Count Down Timer: touch
minutes). When the indicator of the cooking zone flashes slower, the time counts down.
• Checking the remaining time: select the cooking zone with
cooking zone flashes faster. Display shows the remaining time.
• Changing the Count Down Timer: select the cooking zone with
• Stopping the timer: select the cooking zone with
counts backwards to
can also touch
When the time elapses, the sound operates and
off.
• Stopping the sound: touch
CountUp Timer (Count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates.
and
comes on. To stop it, set a heat setting between
00
. The indicator of the cooking zone goes out. To switch off You
and
at the same time.
Operating instructions
again and again until the indicator of a
of the timer to set the time (
. Touch
00
flashes. The cooking zone switches
9
comes on in the
. To
and
.
00
99
-
. The indicator of the
touch
or
.
. The remaining time
Advertisement
Table of Contents
