Removing Printing Jams - Ricoh SP 200SF User Manual

Problem
Paper gets wrinkles.
The printed paper is curled.
Images are printed diagonally to the
pages.
CER091

Removing Printing Jams

• Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
• Toner on prints made immediately after clearing a paper jam may be insufficiently fused and can
smudge. Make test prints until smudges no longer appear.
• Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
will cause further jams and possibly damage the machine.
• Paper jams can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
• Depending on how the paper is jammed, it may be eject automatically by opening and closing the
front cover and turning the power off and then back on twice in a row.
• Paper is damp. Use paper that has been stored properly.
• Paper is too thin. See page 21 "Supported Paper".
• If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
• Load the paper upside down in the input tray.
• Paper is damp. Use paper that has been stored properly.
If there are gaps between the paper and the paper guides,
adjust the paper guides to remove the gaps.
Paper Feed Problems
Solution
147