Setup - Philips 23PFL4509/F7 User Manual

Analog/Cable TV operation
You can select Mono or Stereo if the Analog broadcasting is sending
the MTS (Multi channel television sound).
You can select SAP while your TV is receiving the Analog broadcasting
that has the SAP (Second Audio Program).
Mono to output mono-audio
Audio
Stereo
to output stereo-audio
setting
SAP
to output second-audio program
You can set the digital audio output format.
PCM
to output PCM
Digital
to output Bitstream (When the audio of the
output
Bitstream
content is PCM, it will be output in PCM
format
even if Bitstream is selected.)
Digital TV operation
You can select the Audio language while your TV is receiving the Digital
broadcasting.
Audio
to select the language according to your preference.
Language (It differs depending on the program.)

Setup

Note
The Setup menu item is disabled for non-tuner sources..
•
Setup allows user to do channel installation and other settings for tuner
sources.
1
(MENU) to display Home Menu and use ▲▼ to select
Press
Setup, then press OK.
Picture
Autoprogram
Sound
Antenna
Setup Channel list
Audio only
Features
Auto aspect ratio
USB
2
U se ▲▼◄► to select the item you want to adjust, then press
OK.
Autoprogram
Select one option to install channels: Antenna or Cable.
This item is only applicable when input source is in DTV. A
Antenna
Channel Strength menu will appear on the TV screen indicating
the signal strength of DTV.
Channel list
Displays a list of available channels.
Audio only
Select to turn off the panel screen and keep only the sound on.
Select On to select the appropriate video aspect ratio based on
Auto aspect
information present in input MPEG stream from tuner source.
ratio
Selecting Off uses TV's current Aspect ratio setting.
20
English
Off
On