Table of Contents
Advertisement
4
4
Playing an iPod
This receiver has a dedicated iPod terminal that will allow you
to control playback of audio content from your iPod using the
controls of this receiver.
Important
•
Pioneer cannot under any circumstances accept
responsibility for any direct or indirect loss arising from any
inconvenience or loss of recorded material resulting from
the iPod failure.
Note
•
USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s,
iPhone 4, iPhone 3GS, iPhone 3G, iPod touch (1st through
5th generation), iPod classic and iPod nano (3rd through
7th generation). However, some of the functions may be
restricted for some models.
•
This receiver has been developed and tested for the
software version of iPod/iPhone indicated on the website of
Pioneer (http://pioneer.jp/homeav/support/ios/eu/).
•
Installing software versions other than indicated on the
website of Pioneer to your iPod/iPhone may result in
incompatibility with this receiver.
•
iPod and iPhone are licensed for reproduction of non-
copyrighted materials or materials the user is legally
permitted to reproduce.
•
Features such as the equalizer cannot be controlled using
this receiver, and we recommend switching the equalizer
off before connecting.
•
Make sure the receiver is in standby when disconnecting
the iPod/iPhone.
1
Switch on the receiver and your TV.
See
Connecting an iPod on page
17.
2
Switch the TV input so that it connects to the receiver.
•
Switch the TV input to the input that connects this
receiver to the TV through the corresponding
composite cable.
3
Press
iPod/USB
to switch the receiver to the iPod/USB
input.
The front panel display shows Loading while the receiver
verifies the connection and retrieves data from the iPod.
4
Use
TOP MENU
to display iPod Top menu.
When the display shows Top Menu you're ready to play
music from the iPod.
•
If after pressing
the display shows NO
iPod/USB
DEVICE, try switching off the receiver and
reconnecting the iPod to the receiver.
•
The controls of your iPod will be inoperable when
connected to this receiver.
Playing back files stored on an iPod
To navigate songs on your iPod, you can take advantage of the
OSD of your TV connected to this receiver. You can also
control all operations for music in the front panel display of
this receiver.
•
Note that non-roman characters in the title are displayed as
'*'.
•
This feature is not available for photos or video clips on your
iPod.
Finding what you want to play
When your iPod is connected to this receiver, you can browse
songs stored on your iPod by playlist, artist, album name,
song name, genre or composer, similar to using your iPod
directly.
1
/
Use
to select a category, then press
browse that category.
•
To return to the previous level any time, press RETURN.
2
/
Use
to browse the selected category (e.g.,
albums).
/
•
Use
to move to previous/next levels.
3
Continue browsing until you arrive at what you want to
play, then press
to start playback.
Tip
•
If you're in the song category, you can also press
start playback.
•
You can play all of the songs in a particular category by
selecting the All item at the top of each category list. For
example, you can play all the songs by a particular artist.
24
Basic playback controls
This receiver's remote control buttons can be used for basic
playback of files stored on an iPod.
•
Press
to switch the remote control to the iPod/
iPod/USB
USB operation mode.
•
During Audiobook playback, press
playback speed: Faster Normal Slower
Switches between the iPod controls and the
receiver controls
This allows you to switch between performing iPod operations
via the receiver remote control or on the iPod itself.
Press
iPod CTRL
ENTER
to
•
Press
iPod CTRL
controls when you're done.
Tip
•
Change the receiver's input to the iPod in one action by
pressing
iPod iPhone DIRECT CONTROL
to enable iPod operations on the iPod.
to
ENTER
Basic playback
/
to switch the
to switch to the iPod controls.
again to switch back to the receiver
on the front panel
4
6
37
Hide quick links:
Advertisement
Table of Contents
