Download Print this page

WilTec 61970 Operation Manual page 9

Advertisement

nature of the workspace, other noise sources, etc., e. g. the number of machines and other adjacent
processes. Reliable workplace values may also vary from country to country. However, this informa-
tion should enable the user to make a better assessment of hazard and risk.
Before commissioning
Unpack the extraction unit and check it for any transport damage.
The machine must be set up in a stable manner. Before commissioning, all covers and safety
devices must be properly installed.
Before operating the on/off switch, make sure that the dust bags are securely fastened.
Before connecting the machine, make sure that the data on the nameplate correspond to the
mains data.
Assembly
ATTENTION !
The mains plug must be disconnected before carrying out any maintenance, con-
version or assembly work on the extraction system!
Screw the side plates (2) to the chassis frame and the plastic housing (1) so that the opening
for the catching bags is above the base plate (15).
Insert the holding device (11) for the dust bag into the receiving hole (16) provided on the up-
per side of the plastic housing (1) so that the hook is above the opening.
Secure the lower catch bag (7) to the upper side of the opening using the quick-release device
(9).
Secure the upper catch bag (8) to the upper side of the opening using the quick-release
device (10) and hang it on the hook of the holding device (11).
Connect the suction hose (6) to the adapter (14) and attach it to the connection piece of the
suction unit.
Commissioning
Switching on
1. Check whether the suction hose (6) is firmly connected to the suction unit and to the suction
adapter of the woodworking machine.
2. Check that the dust bags (7/8) are properly fastened.
3. Switch on the extraction unit by pressing the green "I" button.
4. Switch on the woodworking machine.
Switching off
1. Switch off the woodworking machine.
2. Switch off the extraction system by pressing the red "0" button or by pressing the emergency
stop button (17).
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61970
Page 9
02
2021-1

Advertisement

loading