Mounting The Bike Handle - Stihl FS 240 Instruction Manual

English

Mounting the Bike Handle

Mounting Bike Handle with Swiveling
Handle Support
The machine is supplied with the
swiveling handle support already
mounted on the shaft. To mount the
handlebar it is necessary to remove the
clamp moldings.
14
Removing the clamp moldings
Hold the lower clamp (1) and upper
N
clamp (2) firmly together.
Release the wing screw (3) – the
N
clamps are loose once the wing
screw has been released. They are
pushed apart by the two
springs (4 and 5).
Pull out the wing screw – the
N
washer (6) remains on the wing
screw.
2
1
Hold the lower clamp (1) steady and
N
remove the upper clamp (2) –
separate the parts so that the
springs (4, 5) remain in position in
the lower clamp.
5
1
If the spring (5) has slipped out of the
lower clamp (1):
Fit the spring in the clamp's annular
N
groove as shown.
FS 240, FS 240 R
4
5