Steinbach BP-39WS-B Mini Original Instructions Manual page 44

Risk of fire and explosion through leaking finned heat exchanger!
The coolant circuit of the finned heat exchanger contains highly
pressurised, easily flammable, odourless gas. Risk of fire and
explosion in the event of uncontrolled coolant leaks.
- Keep the heat pump away from heat sources and naked flames.
- Do not drill into or scorch the heat pump.
- Do not use any objects apart from those permitted by the
manufacturer to speed up the defrosting process.
- Immediately shut off the heat pump if you suspect a coolant leak.
- The coolant is odourless. Always keep ignition sources away from
the installation site of the heat pump.
- Contact an authorised expert if you suspect a coolant leak.
- Observe the national regulations on gas.
- All persons involved in work on the refrigerant circuit must have a
valid certificate from an industry accredited certification body
that ensures competence in handling refrigerants according to a
specific assessment recognized by industry associations.
- Take precautions so that the device cannot be damaged while in
storage.
- Store the device in a well ventilated location where the room size
corresponds to the room area specified for operation.
Risk of injury due to inadequate qualifications!
Lack of experience or skill in handling the required tools and lack of
knowledge of regional or normative regulations for the necessary
manual work can result in serious injuries or material damage.
- Engage a qualified specialist for all work for which you are unable
to assess the risks due to inadequate personal experience.
44
WARNING!
WARNING!