Auto Invert - Power Science CF-3K-12 Series User Manual

CF(M)-3K-12 SUPERCOMBI USER'S GUIDE
Fig 12. Grid Limit Selector

4.4 Auto Invert

Users can enable or disable Auto Invert function by different setting of the dip
switch on the rear of the remote panel. (See Figure 13).
1. When the Auto Invert function is enabled, the SuperCombi will output AC
power automatically when the SuperCombi is disconnected from the Grid;
2. When the Auto Invert function is disabled, the SuperCombi will not output
AC power if the SuperCombi is disconnected with the grid and it will enter
Standby state;
Fig 13. Auto Invert Selector
20