Table of Contents
Advertisement
Available languages
Available languages
5.2
Menu overview
Main menu
Sub-menu
Function
Status
Status
Display general device information
Display network configurations
Display remote access over Internet
Configuration General
Change general configuration
Change date and time configuration
Change firmware update configuration
Network
LAN configurations
SSH configuration
Remote access Configure remote access over local network
Configure remote access over Internet
Users
Changing the password
About
General
Order Datalog CS-BS-1 open source software
Powered by
Display of the open source applications and
libraries used
History
Display of firmware updates
Links
Useful links
5.3
Displaying firmware versions
In order to display statistics about the firmware updates run, proceed as follows:
Î In the main menu About, select the sub-menu General.
The following information is displayed:
• Firmware update version
• Firmware update date
5.4
Displaying the Device Date / time
In order to display the device date and the device time, proceed as follows:
Î Click the Status main menu.
The following information will be displayed in General:
• Current date and time settings of the Datalog CS-BS-1
• Device Serial
• Last reset
5.5
Displaying network configurations
In order to display the network configuration, proceed as follows:
Î Click the Status main menu.
The following information will be displayed in Network:
• LAN IP address
• LAN network / netmask
• Gateway
• Nameserver 1
• Nameserver 2
See chapter 7.2 Network configuration on page 13.
5.6
Displaying remote access over Internet
In order to display the status of the remote access via Internet, proceed as follows:
Î Click the Status main menu.
On the Remote access over Internet tab, the status of Use Oventrop Portal
for remote access? is displayed.
If the remote acces via Oventrop Portal is enabled, the user e-mail address for
Oventrop Portal will be displayed.
25
Advertisement
Chapters
Table of Contents
