Overview; Included - oventrop Datalog CS-BS-1 Installation And Operating Instructions For The Specialised Installer

1

Overview

• With Oventrop Portal support (www.portal.oventrop.com)
• Comfortable system parameterisation via the the RPT parameterisation tool
• Quick error diagnostics
• Suitable for all controllers with S-Bus
• Integrated LAN connector for network connection
technical data
Housing: plastic, PC-ABS and PMMA
Protection type: IP 20 / EN 60529
Ambient temperature: 0 ... 40 °C
Dimensions: Ø130 mm, depth 45 mm
Mounting: wall mounting
Display: operating control LED
Interfaces: S-Bus for the connection to the controller, 10/100 Base TX Ethernet,
Auto MDIX
Power consumption: < 1,95 W
Power supply:
input voltage of mains adapter: 100 ... 240 V~ (50 ... 60 Hz)
nominal current: 350 mA
input voltage of communication module: > 5 V DC ± 5 %
20
45
Drill hole positions
2

Included




If one of the items mentioned below is missing or defective, please contact your
distributor:
1 Datalog CS-BS-1, mains adapter and S-Bus cable pre-connected
2 Interchangeable mains adapter plugs (EURO, UK, USA, AUS)
3 Network cable (CAT5e, RJ45), 2 m
4 Wall plugs and screws
5 Terminal block for extending the S-Bus cable
Manual
 