D-Link DSM-260 Quick Installation Manual page 5

Connecting to Wi-Fi Using a Web Browser:
Switch your TV or receiver to the HDMI input your DSM-260 is
1
connected to. You will see the D-Link logo on the TV followed by
the main menu.
Press and hold the button on the DSM-260 for 5-15 seconds.
2
The LED will flash red to indicate it is in Direct Connect mode.
Connect your mobile device or laptop to the DSM-260 by
3
entering your wireless settings page and connecting to the
SSID shown on your TV.
Enter the web address shown on your TV into your mobile
4
device's web browser, and a Setup Wizard will appear to help
you connect your DSM-260 to your Wi-Fi network.
Streaming with Miracast
Switch your TV or receiver to
1
the HDMI input your DSM-260
is connected to. You will see the
D-Link logo on the TV followed by
the main menu.
On your mobile device, turn your
2
wireless display feature ON and
select the DSM-260 as your display.
Wait a few seconds for your device
to connect.
The display on your mobile device will now be streamed to
3
your TV.
DSM-260
5