Hardware Overview - D-Link DSM-260 Quick Installation Manual

Hardware Overview

1 Status LED
Micro-USB
2
Port
3 WPS/Mode
Select
4 HDMI Plug
DSM-260
1 2
• Green: The DSM-260 is ready for streaming.
• Red Flashing: The DSM-260 is in Direct Connect mode, and
can be connected to through Wi-Fi for configuration. You
cannot stream video while in Direct Connect mode.
Connects to the supplied USB cable for power.
• Press for less than 3 seconds to activate WPS to connect
to Wi-Fi.
• Press and hold between 5-15 seconds to switch between
Normal mode and Direct Connect mode for configuration.
• Press and hold for over 15 seconds to reset the device to the
factory default settings.
Connects to your TV or home theater receiver for
720p/1080p output.
3 4
3