Tyco Fire Product Gem ISSUE D QUARTZOID Instruction Manual page 2

TYPE TEMPERATURE
RATING
CONVENTIONAL 400°F/204°C
(SIN G1030)
500°F/260°C
NOTES:
1. Listed by Underwriters Laboratories, Inc.
2. Listed by Underwriters' Laboratories of Canada.
3. Approved by the Loss Prevention Council (United Kingdom).
4. Approved by the City of New York under Calendar Number 334-79-SA.
placed. Also, replace any sprinkler that
has a cracked bulb or that has lost
liquid from its bulb (ref. Installation
Section Note).
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative
to any questions.
It is recommended that automatic
sprinkler systems be
tested, and maintained by a qualified
Inspection Service.
LIMITED WARRANTY
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years from date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed,
maintained, modified or repaired in ac-
cordance with applicable Standards of
the National Fire Protection Associa-
tion, and/or the standards of any other
Authorities Having Jurisdiction. Mate-
rials found by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
assume for it, any other obligation in
connection with the sale of products or
parts of products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
FRAME
COLOR
CODE
Green
Orange
LABORATORY LISTINGS AND APPROVALS
P S N 5 1 — 0 3 0 — X — X X X
5.6 K-FACTOR ISSUE D CONVENTIONAL SPRINKLERS
inspected,
incomplete information supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY
OR UNDER ANY OTHER LEGAL
THEORY, FOR INCIDENTAL, INDI-
RECT, SPECIAL OR CONSEQUEN-
TIAL DAMAGES, INCLUDING BUT
NOT LIMITED TO LABOR CHARGES,
REGARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
or
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS' LI-
ABILITY EXCEED
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS
OR IMPLIED, INCLUDING WARRAN-
TIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PUR-
POSE.
BULB NATURAL
LIQUID BRASS
COLOR
Black
Black 1, 2, 3, 4
TABLE A
SPRINKLER
FINISH
1 NATURAL BRASS
7 LEAD COATED
9 CHROME PLATED
TABLE B
PRODUCT SYMBOL NUMBER SELECTION
AN AMOUNT
SPRINKLER FINISH
CHROME LEAD COATED
PLATED (Maximum 150°F/66°C
Ceiling Temperature)
1, 2, 4
1, 2, 4
TEMPERATURE
RATING
400 400°F/204°C
500 500°F/260°C
FIGURE B
W-TYPE 11
SPRINKLER WRENCH
ORDERING PROCEDURE
Contact your local distributor for avail-
ability.
Sprinkler Assemblies:
Specify: 5.6 K-Factor, (specify tem-
perature rating), Issue D Conventional
Sprinkler with (specify type of finish),
PSN (specify from Table B)
Sprinkler Wrench:
Specify: W-Type 11 Sprinkler Wrench,
PSN 56-452-1-001.
WEIGHT
The nominal weight of the 5.6 K-Fac-
tor, Issue D Sprinkler is 5 oz. (142 g).