Table of Contents
Advertisement
2
Package Contents
Your Kingston SLC/Now! processor upgrade package contains the following:
SLC/Now! 20, SLC/Now! 25, or SLC/Now! 50 Processor Upgrade Card.
Installation Guide.
Extraction tool for removing the 80286 processor.
3.5" Kingston Utility Diskette.
SLC/Now! sticker for exterior of system.
If any items are missing or damaged, contact your Kingston dealer for a replacement.
Packaging Materials
The SLC/Now! has been carefully packed in a special anti-static envelope to protect it from static electricity
and shock prior to being shipped to you. Check for damage while unpacking the cached processor upgrade
card. If you notice any damage, notify your place of purchase.
Save all shipping and packaging materials in the event you need to ship these components.
Note:
If your SLC/Now! arrives in cold weather, allow it to reach room temperature before
installation in your PS/2.
Important Static Electricity Precautions
Many of the components in your personal computer are sensitive to electrostatic discharge. The following
precautions can help you reduce the possibility of damaging the components in your personal computer.
Touch a grounded surface before handling any components both inside and outside your system unit.
If the system unit is connected to a grounded outlet, this can be done by touching the outside chassis
of the system unit.
Do not remove your SLC/Now! from the anti-static bag until you are ready to install it in your PS/2.
Hold the card by the edges. Avoid touching the components on the card.
Do not slide the card or any ICs over any surface.
Avoid plastic, vinyl and styrofoam in your work area.
SLC/Now! Installation Guide - Rev. D1
General Information
Kingston Technology Corporation
Advertisement
Table of Contents
