SAFE HOME CLI 810 HF Quick Start Manual

Alarm system
Safe Home CLI 810 HF.
+
Alarming system «Total»
Press button and enter your secret code, depending
on programming mode.
The siren of the control panel emits a lot of audibles
signals to confirm the function – only if it's programmed.
Changing code
Master code
&
Red indicator flashes
Adjust the audible beep level
&
{
SOS
Alarming system «Partial»
Press
on programming mode.
The siren of the control panel emits a lot of audibles
signals to confirm the function – only if it's programmed.
} SOS
Alarming system « A nnexe »
Press
on programming mode.
The siren of the control panel emits a lot of audibles
signals to confirm the function – only if it's programmed.
Disarming system « T otal and Annexe »
Enter your secret code. (You can enter your code in a
sequence of 20 numbers).
The siren of the control panel emits one audible signal to
confirm the function.
User number New code
(1 to 9) (4 digits)
8
Sound level
0 to 7
0 = No sound
1 to 7= siren of the
control panel emits an
audible signal
SOS / Alert on the remote control
Press
Alarming system alert (silent alert).
«Total»
Disarming
SOS / Alert on the panel control
system
Alarming system Press
«Partial» alert (silent alert).
5 sec: on wich
mode is the
alarm system
button and enter your secret code, depending
button and enter your secret code, depending
New code
(4 digits)
long beep
& button simultaneously to trigger an
& button simultaneously to trigger an
Test to do by
customer