Advertisement
After Alignment
Execute the HX290 Service Flag Controller Program again.
Select the COM port number which is connected to the HX290 Alignment Jig.
Press and hold in the [PRESET] key while turning the transceiver on to enter the
Alignment Mode.
Select "Alignment" OFF of HX290 Service Flag Controller Program.
Click the left mouse button on the [SET] button of the HX290 Service Flag
Controller Program.
Turn off the transceiver.
5
Vertex Standard Co., Ltd.
FCC ID: K6630453X20
ID: 511B-30453X20
Alignmenmt
Advertisement
