Jabra Evolve 75e UC Manual

Jabra Evolve 75e UC

How do I pair my Jabra Evolve 75e with my mobile device?

To pair your Jabra Evolve 75e with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off the earbuds by pressing and holding (3 seconds) the Multi-
function button until the LED flashes red and the neckband vibrates.
3. To enter pairing mode, press and hold (3 seconds) the Multi-function
button until the LED flashes blue. If you are wearing the earbuds, you
will hear the pairing instructions.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Evolve 75e from the list of available devices.
If you are asked for a pin code, enter "0000" (four zeros).
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips,
https://www.jabra.co.nz/supportpages/jabra-evolve-75e/7099-823-409/faq/797fb84a-
ad9a-4e0a-9911-7d87cf03811e
16/10/2021 07:14
see here.
Page 1 of 2