Intended Application; Delivery Contents; Description; Appliance Overview - Kompernass KH 1081 Operating Instructions Manual

• Do not move the coffee machine during the
brewing process.
• Remove the jug first when the brewing process
is complete and the filter has fully drained itself.
Risk of stumbling!
• Lay the power cable in such a way that no one
can tread on or trip over it.
• Do not use an extension cable.
Warning regarding appliance
damage!
• NEVER operate this appliance when it is empty
(without water). If you do, the glass jug could
shatter.

Intended Application

The coffee maker is intended exclusively for brewing
coffee. This coffee maker is intended exclusively for
use in private households. Pay heed to all of the
information in this operating manual, especially the
safety instructions. All other uses are deemed to be
improper and may result in property damage or even
in personal injury. We shall not accept liability for
damages caused due to improper use of the
appliance.

Delivery Contents

Coffee machine
Glass jug
Measuring spoon
Operating Instructions

Description

You can prepare hot filter coffee with the coffee
machine.Brewed coffee can be kept warm in the jug
by leaving it on the heating plate with the appliance
switched on.

Appliance Overview

1 Filter insert
2 Aroma selector switch
3 Water tank lid
4 Water volume indicator
5 On/Off switch with integrated control lamp
6 Measuring spoon
7 Filter holder
8 Coffee exit
Setting up and connecting to
the power supply
Risk of electrocution!
Under no circumstances should the appliance be
located close to water, especially sinks and waterfilled
vessels. Use the coffee machine only on a dry
surface. The proximity of water presents a danger,
even when the appliance is switched off. After use,
always remove the plug from the power socket.
Risk of fire!
Never locate the coffee machine close to sources of
heat.
The appliance could be damaged.
Attention!
To avoid damage to the coffee machine and its
place of location, use the coffee machine only
on a level and heat-resistant surface.
- 27 -