Creative Extigy User Manual page 52

You can also enable Direct Memory Access to your storage devices. Follow the steps below:
For Windows 98 SE and Windows Me
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel dialog box, double-click the System icon.
3. In the System Properties dialog box, click the Device Manager tab.
4. Double-click the Disk drives icon.
Your computer drives will appear.
5. Double-click the hard disk drive icon.
6. In the box that appears, click the Settings tab.
7. Click the DMA (Direct Memory Access) check box to select it.
An alert message box appears.
8. Click the OK button.
9. Click the OK button in the next box.
10.Click the Close button on the System Properties dialog box.
11.When prompted to restart your computer, click the Yes button.
12.Repeat steps 4-11 if you have other drives, for example, other hard disk drives,
CD-ROM, CD-RW, and DVD-ROM drives. In step 4, double-click the respective
drive icon.
For Windows 2000 and Windows XP
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel dialog box, double-click the System icon.
3. In the System Properties dialog box, click the Hardware tab.
4. Click the Device Manager button.
5. Double-click the ATA/ATAPI IDE Controllers icon.
Your IDE channels will appear.
6. Right-click the Primary IDE Channel icon.
7. Click Properties.
Troubleshooting B-3