Attaching Sound
Blaster Extigy
Stands
To prevent the IR Receiver
from being blocked, make
sure you attach the stands as
shown in Figure 2-5.
If you want to place Sound Blaster Extigy vertically, attach the provided
stands to the base of Sound Blaster Extigy, as shown in Figure 2-5 below.
IR Receiver
Position Sound Blaster Extigy over the stands so
1
that the grooves of the stands are in alignment with
the rubber pads of Sound Blaster Extigy.
Figure 2-5:
2
Attaching stands to Sound Blaster Extigy.
Installing and Using Sound Blaster Extigy
Push the stands in, and make sure
they fit firmly over Sound Blaster
Extigy as shown above.
2-7