Positioning And Levelling The Appliance; Electrical Connection; Product Description - Nevir NVR-4453 DD Manual

Table of Contents

Advertisement

Available languages

Available languages

Positioning and levelling the appliance

Place the fridge on a stable and level floor. In case the floor is not perfectly
level, use the two adjustable feet on the front part of the fridge. To ensure major
stability, easier movement and a correct positioning of the product, two
additional wheels are present at the rear. In any case we recommend moving
the fridge very carefully in order to avoid floor damage (especially in case of
wooden floor).

Electrical connection

Before switching the refrigerator on for the first time, leave it vertical for at least
two hours. Then connect the appliance's power supply lead to a mains socket
with earth contact, installed in accordance with electrical safety regulations.
The rated voltage and frequency are stated on the nameplate inside the
refrigerator compartment. The appliance must be connected to the electrical
mains and earthed in compliance with the relevant regulations and
requirements. The appliance is able to withstand short fluctuations in voltage of
no more than 15% less or 10% more than the rated voltage stated on the
nameplate. If the power supply lead has to be replaced, this operation must
only be carried out by a qualified technician. The socket must be accessible
after the appliance has been placed.

Product Description

1.
Freezer compartment with shelf
2.
Thermostat and interior light
3.
adjustable glass shelves
4.
Defrost water collection channel - Drain tube
5.
Vegetable box with glass cover
6.
Height adjustable front feet
7.
Shelf for bottles
8.
Shelf for tubes and small tins
9.
Special rack for eggs
Shelves
Each refrigerator comes complete with several shelves which can be set at
different heights by placing them on the runners provided. Each shelf has a
safety fitting to prevent it from being pulled completely out or accidentally
removed. To remove it from the appliance, lift it at the back and extract it. Then
change the position of the shelf or shelves as you require. For easy removal of
all internal accessories, the door has to be opened completely.
20
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents