Optus CVG824G User Manual page 5

3. Front Panel Description
The front panel of your Wi-Fi Cable Modem provides status LED's that indicate how well and what The front panel of your Wi-Fi Cable Modem provides status LED's that indicate how well and what
state your Wi-Fi Cable Modem is operating. See below table for more information on front panel state your Wi-Fi Cable Modem is operating. See below table for more information on front panel
LED status indicator functions. LED status indicator functions.
Power
Cable Link
Wireless
USB
Voice ports
(1 and 2)
LAN
Local Area Network
(1, 2, 3 and 4)
• Green solid: Power is supplied to the gateway.
• Off: Power is not supplied to the gateway.
• Amber slow blink: Scanning downstream channel.
• Amber fast blink: Synchronization.
• Green solid: Cable link.
• Green blink: Upstream data traffic.
• Off: No configuration.
• Green solid: The wireless connection is operating normally.
• Green blink: Data is being transmitted or
received on the wireless interface.
• Off: No wireless link is detected.
• Green solid: A USB device is connected to the USB port.
• Off: No USB device is connected.
• Green slow blink: Phone is registering with Optus telephony switch
• Green solid: Registered with Optus telephony switch
• Green blink: There is an active call
• Off: No phones are connected to the voice port.
• Green on: The Local port has detected link with a 100 Mbps device.
• Green blink: Data is being transmitted or received at 100 Mbps.
• Amber on: The Local port has detected link with a 10 Mbps device.
• Amber blink: Data is being transmitted or received at 10 Mbps.
• Off: No link is detected on this port.