CytoTherm CT-D4 Manual
  1. Manuals
  2. Brands
  3. CytoTherm Manuals
  4. Laboratory Equipment
  5. CT-D4
  6. Manual

CytoTherm CT-D4 Manual

Dry plasma thawing with massaging action
Hide thumbs
Table of Contents

Advertisement

Quick Links

Tel 800 747
Tel 800 747-9699 or 609 396-1456 Fax 609 396-9395
Email serve@cytotherm.com Web www.cytotherm.com
Email serve@cytotherm.com Web www.cytotherm.com
Email serve@cytotherm.com Web www.cytotherm.com
CytoTherm
CytoTherm-D4
Dry Plasma Thawing
Massaging Action
Massaging Action
with
Model
CT-D4
Ver 409 and
higher
Owner's Manual
CytoTherm
Each
fully warranted for a period of two
9699 for assistance. If necessary send unit to:
9699 for assistance. If necessary send unit to:
CytoTherm
110 Sewell Ave. Trenton, NJ USA Tel 609 396
Please record the following:
Please record the following:
Please record the following:

TABLE OF CONTENTS

TABLE OF CONTENTS
1
Specifications
2
2
3
3
5
5
SPECIFICATIONS:
over thawing temperature. 45
900 Watt, Available in 120 Volt or 230 Volts, 50 or 60 Hz. (must be grounded).
Watt, Available in 120 Volt or 230 Volts, 50 or 60 Hz. (must be grounded).
CytoTherm
110 Sewell Ave.
110 Sewell Ave.
Thawing
W A R R A N T Y
W A R R A N T Y
product is manufactured under rigid quality control standards. This unit is
product is manufactured under rigid quality control standards. This unit is
product is manufactured under rigid quality control standards. This unit is
two years from the date of purchase. Call 609 396
from the date of purchase. Call 609 396-1456 or 800 747-
e. Trenton, NJ USA Tel 609 396-1456 Fax 609 396
Serial No. ___________ Date of Purchase _________
Serial No. ___________ Date of Purchase _________
Serial No. ___________ Date of Purchase _________
Thawing temperature adjustable 25
Thawing temperature adjustable 25
o
C safety thermostat. Accuracy 0.1
C safety thermostat. Accuracy 0.1
Trenton NJ 08610 USA
Trenton NJ 08610 USA
1456 Fax 609 396-9395
Draw\Instruct CT Products\CTD4ins
7
Troubleshooting
8
Maintenance
9
9
10
11
Wiring Diagram
o
o
C to 40
C. Preset to 37.0
o
C. Easy to do, digital temperature calibration. Power
C. Easy to do, digital temperature calibration. Power
9395
CTD4insP.doc 27 Jun 16
o
o
C. Overtemp alarm 1.0
o
C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CT-D4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CytoTherm CT-D4

Summary of Contents for CytoTherm CT-D4

  • Page 1: Table Of Contents

    110 Sewell Ave. Trenton NJ 08610 USA Trenton NJ 08610 USA Tel 800 747 Tel 800 747-9699 or 609 396-1456 Fax 609 396-9395 9395 Email serve@cytotherm.com Web www.cytotherm.com Email serve@cytotherm.com Web www.cytotherm.com Email serve@cytotherm.com Web www.cytotherm.com CytoTherm CytoTherm-D4 Dry Plasma Thawing...

  • Page 2: Description

    DESCRIPTION The CytoTherm-D4 (Model CT-D4) is a laboratory instrument for thawing plasma while keeping the plasma bag dry. Tempered water is recirculated through a bladder. The plasma bag to be thawed lays on one part of the bladder, while rest of the bladder is folded over and covers the plasma...

  • Page 3: Operation

    OPERATION Wait for the water to heat up to 37.0 C. Open the LID by: C. Open the LID by: 1. Pushing the LOCKBAR to the left. 2. Lifting the front of the LID until it is vertical. 2. Lifting the front of the LID until it is vertical. 3.
  • Page 4 3. Plasma bag and BLADDER both leaked Plasma bag and BLADDER both leaked. It is a very unlikely case. After you determine that the plasma bag . It is a very unlikely case. After you determine that the plasma bag leaked, discard the plasma bag(s) and squeeze down lightly on the BLADDER.

  • Page 5: Bladder Replacement

    When the temperature reaches 1.0C above the target temperature the alarm will sound. Turn Off the unit. If alarm does not sound, contact CytoTherm. Alarm test should be performed every 3 months as part of unit maintenance.
  • Page 6 Programming the Thawing Time. When the thawing time is displayed, press MINUS because you want to change the time. Use PLUS or MINUS to set the desired new thawing time, press ENTER to program in the new time. Turn the unit off. Calibrating Temperature.
  • Page 7 If the operator pours hot water into the bath he/she will trigger this alarm. This should never happen in normal operation. If it does, contact CytoTherm. CLOSE LID indicates that the lid is not closed. If the lid is closed, check if there is a magnet imbedded in the LID on the front right side.
  • Page 8 RACK. Bend them out so that the bottom of the spring is 1.2 cm (.5”) from the BATH wall. In the very unlikely event that the spring breaks, please contact CytoTherm and we will rush you a new spring with mounting instructions.

  • Page 9: Parts List

    Turn Off the unit. If alarm does not sound, contact CytoTherm. Alarm test should be performed every 3 months as part of unit maintenance. BLADDER Maintenance. The bladder does not require periodic maintenance. In case of a plasma bag leak, remove the BLADDER, rinse the BLADDER under running water and wipe with bleach towelettes or a 10% bleach solution.

  • Page 10: Safety Features

    SAFETY FEATURES WATER LEVEL SENSOR The unit will display LOW WATER and beep if there is not enough water to cover the level sensor inside the bath, a screw located 3/4" above the temperature sensor. The heat will also turn off. The water must be conductive in order for the level sensor to work.
  • Page 11 This page intentionally left blank.
  • Page 12 CT-4D Board 240V xform Fuse-3 [12VAC] 120V Pump B = 240V MOV Wiring CT-D4 & CT-D2 Dwg # 434 15 Apr 04 Change dwg to move Switches Connector to right corner. Change started with board ver.G. Add D2 May 2003 New...

Table of Contents