MWorks THX S750 CLE.book Page 11 Friday, September 5, 2003 12:05 PM
With the Upmix feature, the 5.1
or 6.1-channel content can be
played through all seven satellite
speakers on your GigaWorks. This
creates a 7.1-channel sound field
that improves side and rear
imaging.
This Upmix feature is also found
No. of audio channels
Source Device
on source device
Audigy 2 ZX
Up to 7.1
Audigy 2
Up to 6.1
Audigy or 5.1 SB
Up to 5.1
Live!
USB Sound
Up to 7.1
Blaster Audigy 2
NX
Audigy 2 ZX
Up to 7.1
Platinum
Creative Decoder
Up to 6.1
DDTS-100
(Speaker configu-
ration set to 6.1 or
7.1)
DVD player with
Up to 5.1
built-in surround
decoder
Table 2: How upmixing maximises the usage of your GigaWorks S750
Understanding Upmixing
on other Creative audio products;
you should only enable upmixing
on either your audio device or your
GigaWorks S750 (but not both).
The table below shows you when
you should bypass the upmixing
feature on your speakers. The
upmix feature only applies to a 5.1
and 6.1 signal from the output
source device. Auxiliary and
M-PORT analog stereo inputs are
unaffected.
Recommended GigaWorks
Upmix settings
No upmix required.
(Upmixing from the source device
recommended)
6.1 → 7.1
5.1 → 7.1
No upmix required.
(Upmixing from the source device
recommended)
No upmix required.
(Upmixing from the source device
recommended)
6.1 → 7.1
5.1 → 7.1
Number of speakers
utilised
Up to 7.1
(depending on source)
7.1
7.1
Up to 7.1
(depending on source)
Up to 7.1
(depending on source)
7.1
7.1
11