Understanding Input Connectors - Creative MegaWorks THX 6.1 User Manual

MWorks THX 650D CLE.book Page 3 Wednesday, January 8, 2003 10:03 AM
Using headphones
For private listening, you can
❒
connect headphones to the
Headphones Output of the
remote control.
This will mute all speakers.
Select MASTER volume mode
❒
to adjust the volume of your
headphones.
❒ Select TREBLE mode to adjust
the treble levels of your
headphones.
Select SUB mode to adjust the
❒
bass levels of your headphones.
Notes
• When you disconnect your headphones
from the Headphones Output, the
speaker system will revert to the default
MASTER volume setting (two Level
Indicators lit), so as to prevent high
headphones volume levels from being
applied to the speaker system.
• REAR mode and CENTER mode are
disabled when you are using headphones.
Muting the volume
To temporarily mute speakers or
❒
headphones, press the MUTE
button once.
All lit Level Indicators will
blink during mute mode.
To return to normal listening,
❒
press the MUTE button again.
Alternatively, you can disable
mute mode by pressing either
or .
Understanding
Input Connectors
MegaWorks THX 6.1 650D provides
three sets of input connectors:
6.1 Analog inputs for up to 6.1
❒
channels
❒ Auxiliary Analog Stereo input
for up to 2 channels
Digital input for up to 5.1
❒
channels from multichannel
audio cards with digital output.
Figure 2: Input connectors on the rear panel
See "Connecting Input Devices" on
page 4 for details of cable
requirements. Basic cables for all the
inputs are supplied.
Note: In certain situations, you may
require additional cables that are not
provided.
3