Operation; Operation Villeroy&Boch Mood Light / Emotion Controller - Villeroy & Boch Finion UBQ177FIN7A2BCV2 Installation Instructions Manual

6 Operation

Warning!
Danger of electrocution!
Touching live parts can lead to severe injury and even death.
Live parts, excluding parts supplied by SELV circuits at voltages not exceeding 12 V, must not
•
be accessible to a bathing person.
Important
Slow moving/weak elderly or disabled persons should take care when using the bathtub
and must be extra careful when getting in and out.
Read the general safety and installation instructions carefully before using the unit.
6.1 Operation Villeroy&Boch Mood Light / Emotion controller
The Finion bathtub can be equipped with Mood Light as an option. The Villeroy&Boch Emotion controller for
operating the Mood Light is not included in the delivery.
The Villeroy&Boch Emotion controller has been developed specially for use in bathrooms. The Villeroy&Boch
Emotion controller is a 4-channel controller which can be used to regulate up to three light channels. The fourth
channel is reserved for controlling the mirror heater.
Button 2 on the Villeroy&Boch Emotion controller is pre-programmed for operating the
Finion Mood Light function. If button 2 is actuated and held down, the intensity of the light increases continuously.
The intensity goes to the most dimmed stage after reaching the maximum intensity.
www.villeroy-boch.com // V 1.1 // 24.10.2017 //
Villeroy&Boch Emotion controller
A Switches all the lights on at once
B Switches all the lights off at once
C The buttons 1 to 3 switch the individual lights on and
off
D Switches the mirror heating on (automatic switch-off
after 30 min)
E Setting warm white
F Setting cold white
G Signal LED
11