Bimar VR28 Instruction Booklet page 16

right and left by pressing the (12) button on the control panel or remote
control.
4 Filters:
a) 1 Rear filter: remove the lid using the handle, the
internal honeycomb filter is sprayed with water and
thus cools the air that passes through it. The filter
can be easily extracted by pulling the two handles
on the side panels (15) outwards. To insert the filter
(always ensure the side panels are present) and lid
in place, repeat this operation in reverse.
b) 1 filter on the right side: turn the lid clockwise
and remove it; the internal filter (see above for
characteristics and for its removal and
insertion). Replace the lid (use the lid with the
internal label corresponding to the symbol
on the main unit so that the
lid and the
then turn it counterclockwise all the way.
c) 1 filter on the left side: turn the lid
counterclockwise and remove it; the internal
filter (see above for characteristics and for its
removal and insertion). Replace the lid (use
the lid with the internal label corresponding
to the symbol
" "
the
symbol on the unit meet and then turn it
clockwise all the way..
d) 1 filter on the front: internal filter (see above
for characteristics and for its removal and
insertion).
At the end of the operation, check that each filter and lid are correctly
assembled.
" "
symbol on the unit meet and
) ) on the main unit so that
symbol on the lid and the
" "
symbol on the
" "
16/48
)