Profi-pumpe AC23A Operating Instructions Manual page 4

4 English
8. RECOGNISING AND REPAIRING OF MISTAKES
Problem
The pump permanently switches on
and off (Pump clocked)
The pump will not start
The pump will not stop
9. NOTES ON PRODUCT LIABILITY
We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if no
changes were made to the equipment. If repairs are carried out by our authorized service, we are only liable if original
spare parts and accessories were used.
10. NOTES ON DISPOSAL
Electro devices of our company, labeled with the symbol of the crossed trash bin, are not permitted to
be disposed in your household garbage. We are registered at the German registration department EAR
under the WEEE-No. DE25523173. This symbol means, that you're not allowed to treat this product as
a regular household waste item – it has to be disposed at a recycling collection point of electrical devices.
This is the best way to save and protect our earth.
THANK YOU FOR YOUR SUPPORT!
11. EU DECLARATION OF CONFORMITY
The products listed overleaf accordance with the marketed in accordance with the relevant provisions listed below, the
relevant EU directives and harmonized with EU standards for safety. This declaration is valid insofar on the product,
no changes are made.
Authorized person to keep the technical documents:
1A-Profi-Handels GmbH · Unterriethstraße 37 · D-65187 Wiesbaden
Low Voltage Directive (2006/95/EC)
EC Electromagnetic compatibility directive (2004/108/EC)
The following harmonized standards:
EN 60730-1:2000+A1+A2+A12+A13+A14+A16
EN 60730-2-6:2008
Wiesbaden, 12th December 2013
Peter Neumüller
Mögliche Ursache
The system has leaks. Internal
check valve may leak
1. No mains voltage present
2. Too much difference in height bet-
ween the device and a customer
(taps)
3. The pump is defective
4. Malfunction of the device
1. The system has greater leakages
2. Malfunction of the device
3. Internal check valve is dirty
Lösung
Vent system
Check system to dripping pipes /
faucets / valves.
Check non-return valve in the unit
for leaks
1. Check the electrical connections
2. Reduce height difference
3. Contact a qualified technician
4. Montact the merchant
1. Check the system
2. contact the dealer
3. Pump + Rinse machine (see 6)