Advertisement
TRANSMITTER OPERATION (Figure 4)
1. To operate the fan using the remote, make sure fan pull chain is on high
and light is turned on. Then press and release the following buttons:
Fan Off - Turns the power to fan off.
Light Control - Turns the light on and off. Press and hold to dim or brighten
lights (for dimmable bulbs only).
High Speed - Turns on fan at high speed.
Light Delay - Light stays on for 60 seconds to allow for safe exit from room.
Tap Light Delay once to activate. Fan light blinks once to confirm Light
Delay is active. Press any button to cancel.
Medium Speed - Turns on fan at medium speed.
Variable Breeze - Simulates a breeze in nature. Press and hold button to
activate. Press any fan speed button to cancel.
Low Speed - Turns on fan at low speed.
Home Shield™ - Simulates occupancy while away from home. Fan remains
off and the light randomly turns on for a minimum of five times and a
maximum of 20 minutes. The light remains off for 60 minutes between
events. Press and hold button to activate. Light will blink twice to confirm
Home Sheild is active. Press any button to cancel.
LED indicator - should illuminate when any remote button is pressed. If not,
replace the DC3V, CR2032 batteries.
TROUBLESHOOTING
• Is the wall switch turned on? Is power turned on at the circuit breaker?
• Is it wired correctly and receiving power? Are the wire connectors tight for
each wire connection?
• Is the fan pull chain set to High and light pull chain set to the On position?
• Is the transmitter battery new and fully charged?
• Syncing process between fan and transmitter may not have been
successful-- see ACTIVATE THE SYNCING PROCESS.
• Won't operate at a distance – make sure antenna wire is not obstructed.
WARRANTY
This product is warranted to be free from defects in material and
workmanship, under normal use and maintenance, for a period of (1) year
from the date of purchase. This warranty shall not cover any removal
or re-installation costs, and shall not apply to: (i) cosmetic damage,
such as scratches, nicks and dents; (ii) any alteration or improper repair,
maintenance, handling, or installation; (iii) the combination of the product
with other systems or components; (iv) consumable parts, such as batteries,
including any deterioration or damage to the product caused by the use
of faulty batteries; (v) damage caused by accident, abuse, misuse, water,
flood, fire, or other acts of nature or external causes; (vi) damage caused
by service performed by anyone who is not an authorized service provider;
or (vii) damage to a product that has been modified or altered. Your sole
and exclusive remedy for a breach of warranty shall be replacement of the
product. Alternatively, you may return your product to the retailer from which
you made your purchase in accordance with applicable return policies.
The warranties and remedies contained herein are exclusive and in lieu
of all other warranties whether express, implied, or statutory, including
any liability arising under any warranty of merchantability or fitness for a
particular purpose, statutory or otherwise. This warranty gives you specific
legal rights, which may vary from state to state. In no event shall any party
be liable for any incidental, special, indirect, or consequential damages,
whether resulting from the use, misuse, or inability to use this product
or from defects in the product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitations
may not apply to you.
To obtain warranty service, please call the customer service number below.
One of our customer service representatives will assist you in determining
whether you have a warranty claim and, if so, how to return your product.
If you return your product for a warranty claim, please securely pack your
product and include a copy of the original sales receipt, which is required as
the proof of purchase for all warranty claims. You shall be responsible for
shipment and assume all costs and risks associated with any product return.
The Honeywell Trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representations or warranties with
respect to this product.
This product is manufactured for
Hong Kong China Electric Appliance, LTD.
3350 Players Club Parkway, Suite 225
Memphis, TN 38125
1 (877) 361-3883
LED Indicator
Light Control
Fan Off
Light Delay
High Speed
Variable Breeze
Medium Speed
Home Shield™
Low Speed
Figure 4
LEARN Button
Battery Door
Figure 5
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment
and receiver.
--Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly
approved by the grantee of this device could void
the user's authority to operate the equipment.
FCC ID 2AQZU-18007
Battery Compartment
(battery door removed)
Printed in China
9598 • 040620
Advertisement
