Table of Contents
Advertisement
• Do not use a battery pack or tool that is damaged or
risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
SERVICE
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
•
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
RATCHETS
• Hold the power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Always use common sense and be cautious
•
when using tools. It is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you feel
the work is beyond your capability; contact
Tool or a trained professional for
MILWAUKEE
®
additional information or training.
•
Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE
service facility for a replacement.
®
Some dust
WARNING
sawing, grinding,
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
•
crystalline silica from bricks and cement and other
masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
ADDITIONAL BATTERY SAFETY RULES
To reduce the risk of fire, personal
WARNING
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater , certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
Do not charge non-rechargeable
WARNING
batteries.
Charging im-
creat
ed by power sanding,
drilling,
and other
SPECIFICATIONS
Cat. No. .............................................. M12 FHIR38
RPM
.
. . .
. . .
. . .
. . .
. . .
. . .
. . .
Torque Range ........................................ 0-47.5 Nm
Square Drive Anvil ............................................ 3/8"
Volts........................................................... 12V DC
Battery Type .................................................M12™
Charger Type................................................M12™
Recommended Ambient
Operating Temperature ......................-17°C to 51C
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Read operator's manual.
Lock Switch
Regulatory Compliance Mark (RCM).
This
regulatory requirements.
Do not dispose of electric tools
together
material. Electric tools and electronic
equipment that have reached the end
of
their
separately
environmentally compatible recycling
facility.
FUNCTIONAL DESCRIPTION
5
4
3
2
1. Paddle switch
2. Lock switch
3. LED
4. 3/8" square drive anvil
5. Forward/reverse toggle
6. Fuel gauge
7. Handle
3
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
product
meets
with
household
life
must
be
and
returned
6
1
. . .
. . .
0 - 450
applicable
waste
collected
to
an
7
Advertisement
Table of Contents
