Table of Contents
Advertisement
Available languages
Available languages
• Never pull the plug out of the socket by the
cable.
• Never immerse the device in water.
• Protect the device and cables against heat and
moisture.
• The device shall not to be exposed to rain.
Scope of delivery
No. in
fig. 1,
Quantity
page 3
1
1
2
3
1
4
1
5
1
6
1
Intended use
The collapsible LED pendant light is suitable for:
• Interior illumination within tents or awning tents
• Indoor use only
The lighting system is not suitable for:
• Outdoor use
This product is only suitable for the intended pur-
pose and application in accordance with these
instructions.
This manual provides information that is necessary
for proper installation and/or operation of the
product. Poor installation and/or improper operat-
ing or maintenance will result in unsatisfactory per-
formance and a possible failure.
The manufacturer accepts no liability for any injury
or damage to the product resulting from:
• Incorrect assembly or connection, including
excess voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
Description
Remote control
Suspension carabiner
LED light
5 m AC cable with power
adapter
5 m DC cable
Remote receiver
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Kampa reserves the right to change product
appearance and product specifications.
The radio equipment of the device complies with
the requirements of the directive 2014/53/EU.
You can find the Declaration of Conformity of the
device on documents.dometic.com.
Technical description
The collapsible LED pendant light is designed for
operation with AC power or DC power. The
device can be folded for storing.
Control elements
No. in fig. 2,
page 3
1
2
3
Installing the device
➤Proceed as shown (fig. 4, page 3 – fig. 6,
page 4).
Using the device
Before first use
1. Remove the plastic tab from the remote con-
trol's battery.
2. Pair the remote control to the remote receiver
(fig. 9, page 5).
Switching on and off
➤Proceed as shown (fig. 7, page 4).
Dimming the light
➤To dim the light continuously, proceed as
shown (fig. 0, page 5).
➤To dim the light in percentage steps, proceed as
shown (fig. a, page 5).
4445103411
Description
On/off button
+ and – buttons
Percentage buttons
7
Advertisement
Table of Contents
