Scope Of Delivery; Technical Description; Intended Use; Installing The Device - Kampa SabreLink 30 Installation And Operating Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
• Never pull the plug out of the socket by the
cable.
• Never immerse the device in water.
• Protect the device and cables against heat and
moisture.
• The device shall not to be exposed to rain.

Scope of delivery

Starter kit
No. in
fig. 1,
Quantity
page 3
1
1
2
1
3
1
4
2
5
1
6
1
7
1
Add-on kit
No. in
fig. 2,
Quantity
page 3
1
1
2
1
3
2
4
1

Intended use

The lighting system is suitable for:
• Interior illumination within tents or awning tents
• Indoor use only
The lighting system is not suitable for:
• Outdoor use
Description
Remote control
Remote receiver
LED light
Carabiner
5 m AC cable with power
adapter
Velcro strip
5 m DC cable
Description
3 m connection cable
LED light
Carabiner
Velcro strip
This product is only suitable for the intended pur-
pose and application in accordance with these
instructions.
This manual provides information that is necessary
for proper installation and/or operation of the
product. Poor installation and/or improper operat-
ing or maintenance will result in unsatisfactory per-
formance and a possible failure.
The manufacturer accepts no liability for any injury
or damage to the product resulting from:
• Incorrect assembly or connection, including
excess voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Kampa reserves the right to change product
appearance and product specifications.
The radio equipment of the device complies with
the requirements of the directive 2014/53/EU.
You can find the Declaration of Conformity of the
device on documents.dometic.com.

Technical description

The lighting system is designed for operation with
AC power or DC power. Up to three LED lights can
be linked together using one power adapter.
Control elements
No. in fig. 3,
page 4
1
2
3

Installing the device

Starter kit
➤Proceed as shown (fig. 5, page 4 – fig. 7,
page 4).
4445103371
Description
On/off button
+ and – buttons
Percentage buttons
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sabrelink 48

Table of Contents