Us Ing Yo Ur B Le N D -N - G O - Oster XPERT Series Instruction Manual

US ING YO UR B LE N D -N - G O

(M O D ELS WIT H BL E ND - N- GO ACC ESSOR Y ONLY )
IMPORTANT NOTE: The Blend-N-Go cup attachment is only compatible with the GRAY
Threaded Bottom Cap with the Locking Lever and the GRAY Sealing Ring with notches.
IMPORTANT: PLEASE MAKE SURE TO USE THE FOLLOWING PARTS FOR THE
BLEND-N-GO CUP:
Locking
Lever
Before washing ensure the blender is off and unplugged. Wash all components except blender
base with soapy water with a soft sponge and a bottlebrush. Do not use abrasive cleansers or
sponges for cleaning. Rinse well and dry. Parts are also dishwasher safe.
Place desired ingredients into cup according to the following order:
Liquids, fresh ingredients, frozen fruit, ice, yogurt and ice cream.
WARNING: DO NOT PROCESS HOT FOODS OR LIQUIDS IN THE
BLEND-N-GO JAR.
(Cut all firm fruits, vegetables and other foods into pieces no larger than 1.25 cm (1/2-inch) by
5.0 cm (2 inches).
1. Place blade into gray threaded bottom cap (Fig. 27).
CAUTION: Blades are sharp. Handle carefully.
2. Place sealing ring over blade assembly. Carefully press and tuck sealing ring into locking
groove (Fig. 28).
3. Ensure the locking sealing ring is fully and evenly tucked in place and holding the blade
assembly to the threaded bottom cap. For correct assembly see (Fig. 29).
4. Install the integrated threaded bottom cap and blade assembly onto the cup. (Fig. 30).
NOTE: For proper installation onto blender motor base, make sure locking lever rotates
past the anti-rotation tabs on the Blend-N-Cup cup. Locking lever should not be positioned
on top of any of the tabs (Fig. 31). Make sure to tighten the gray threaded bottom cap onto
the cup as far as possible, ensuring that it passes the last anti-rotation tab (Fig. 32)
5. Place cup assembly onto blender base (Fig. 33). Hold cup in position while blending. Operate
blender according to the instructions in this instruction manual. Blend until desired consistency.
6. Remove cup from base (Fig. 34).
7. Remove threaded bottom cap.
8. Place lid on cup and turn clockwise to tighten (Fig. 35).
You're now ready to enjoy your blended drink!
Fig. 28
Fig. 27
Gray
correct
incorrect
correct
Fig. 29 Fig. 30
Black
incorrect
incorrect
correct
Fig. 31 Fig. 32
E ng lish-7
correct
incorrect
Fig. 33 Fig. 34
Gray
Black
Fig. 35