Subscribe to Our Youtube Channel
Related Manuals for RICHTECH V2 Pro
Summary of Contents for RICHTECH V2 Pro
- Page 1 Automated Al Temperature Screening System (AA TSS) Model V2 Pro USER MANUAL COPYRIGHT RICHTECH 2020 � ( €...
- Page 2 The system detects skin surface temperature, which is typically 1°F lower than internal body temperature. If you have trouble setting up the device, please refer to tutorial videos located on our website: https://www.richtech-ai.com/tutorial-videos Warranty information can be found at https://www.richtech-ai.com/product-warranty...
- Page 3 Certifications CE inspection test, certificate number BKC200507AC, in line with the following standards: EN 55032:2015 EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019 EN 55035:2017 FCC inspection test, certificate number BKC200508AC, in line with the following standards: FCC PART 15 Subpart B RoHS test, certificate number BKC200509AC, in line with the following standards: IEC 62321-4:2013+A1:2017 IEC 62321-5:2013 IEC 62321-6:2015...
-
Page 4: Table Of Contents
3.3.11 Access control........................- 28 - 3.3.12 Error Message......................... - 29 - 3.3.13 Volume..........................- 30 - 3.3.14 V2 pro connected to PC directly by Ethernet cable..........- 30 - 4. Desktop Management Terminal....................- 32 - 4.1 Setup........................... - 32 - ... - Page 5 4.2.2 Setting..........................- 35 - 4.3 Batch Operation.......................- 35 - 4.3.1 Upgrade Firmware in Batch....................- 35 - 4.3.2 Change IP Configuration in Batch.................- 36 - 4.3.3 System Configuration In Batch..................- 37 - 4.4 User............................. - 38 - 4.4.1 Add user..........................- 38 - 4.4.2 User management......................
-
Page 6: Introduction
Both the CDC and FDA recommend having routine temperature screening for employees upon arriving at work. When deployed as part of a multilayered preventative response to COVID-19, the AATSS V2 Pro will protect your employees and facilitate the re-opening of your business. -
Page 7: Setup
Internet Explorer: Version 10 or above Please follow the network setup tutorial on our website: https://www.richtech-ai.com/tutorial-videos Once the system is set up on your network, simply open IE 10+ and navigate to the static IP address you assigned to the system to access its settings. -
Page 8: Screen And Icon
Note: We recommend using Window 10 to manage the AATSS V2 pro. 2.1 V2 pro connect to the network If you need to manage the V2 Pro through a network, please connect the base to your router using an ethernet cable. See below:... - Page 9 V2 Pro, and disable the other NIC. See below. The default mode of the V2 Pro to connect to the Internet is DHCP (Dynamic Host Configuration Protocol). The device will obtain the IP address automatically.
-
Page 10: Setting Of V2 Pro Ip Address
In Network-> LAN, please select "Close" in DHCP Enable. Then click the "Save" butto to save the new settings. The V2 Pro will reboot again, and the IP address will be adjusted to the static IP address, e.g. 192.168.0.25. Gateway is 192.168.0.1... -
Page 11: Management Terminal(Web)
3. Management Terminal (Web) Supported browsers: Firefox v. 42 + Chrome v. 23 + MS Edge v. + 13 3.1 Video monitoring 3.2 Login interface When you open the management terminal (web) for the first time, please input the device IP address, e.g. -
Page 12: Settings
3.3 Settings 3.3.1 Account You may change the username and password, and add two users that only have access to the browse date and no permission to change settings. 3.3.2 System a. System Info. You can change the device name here. - 7 -... - Page 13 b. System Time. You can change the time zone and set time preferences. - 8 -...
-
Page 14: Maintenance
3.3.3 Maintenance a. Upgrade Under Windows, supported browsers are Google Chrome, Firefox and Microsoft Edge. Under Mac OS, Firefox is supported. Step 1: Log into the Web Management Terminal and go to “System\Maintenance” Click “Browse” and select the firmware update file(s), then click the upgrade button to upgrade. -
Page 15: Security
3.3.4 Security HTTPS configuration for: Google Chrome, Firefox, Microsoft Edge (latest version). 1. Create Certificate Open the page under System\Security Click “Create Certificate” and the following page will pop up. Fill in the information and click "Create" after finishing. - 10 -... - Page 16 Once that is complete, click the “Install” button to install. After installation we will get the following page: - 11 -...
- Page 17 Click the "Download" button to download the certificate. 2. Install the certificate. Windows Installation Double-click on the downloaded certificate to install following the steps below. - 12 -...
- Page 18 - 13 -...
- Page 19 - 14 -...
-
Page 20: Mac Os Installation
Mac OS Installation 1) Double-click the certificate 2) Open the window as shown below. Choose the new certificate in the list and right- click to open the menu. 3) Select “Get info”. - 15 -... - Page 21 Set all of the following selections to "Always Trust". - 16 -...
- Page 22 If all settings are correct, you will get the following result: Reboot your Mac and it will now work. 3.Enable https mode access. Select the box for Enable. Click "Save" and the AATSS will reboot and enable HTTPs mode. - 17 -...
- Page 23 4. Firefox Settings Click the Settings button and open the menu. Then click ”Options”. - 18 -...
- Page 24 Under “Privacy & Security” click “View Certificates”. Follow the steps shown below to import certificate. - 19 -...
- Page 25 - 20 -...
-
Page 26: Advertisement
3.3.5 Advertisement 3.3.6 Screen Screen Parameter Options: Auto mode, Always bright, and Time. - 21 -... -
Page 27: Network
3.3.7 Network 3.3.8 Advanced a. Email– An alert will be set to the recipient email addresses when an abnormal temperature is detected. SMS alerts can also be sent using this function by using your wireless carrier’s email-to-SMS function. Please see chart below for how to format the SMS email address.(Not all carriers are listed) Carrier Email Format... - Page 28 Server Authentication: Server verification switch, can be turned on and off. Click "Log" to check sent email logs. b. FTP- Used to transfer files from the device to your PC. - 23 -...
-
Page 29: Ai Settings
c. RTSP- Full camera feed streaming, provides easy integration into existing security camera systems. 3.3.9 AI settings - 24 -... - Page 30 Basic Default Options Face Recognition Enable Enable Disable Face Matching Enable Enable Disable (You must enable face matching in order to see this option under Integration) Sensitivity 0-100 (The lower the setting, the faster the system can recognize faces. However, it may recognize other objects as faces if the setting is too low) Snapshot pixels...
-
Page 31: Face Library
Face Tracking Enable Enable: Green square will be shown on the screen to display face tracking Disable Camera moves up and down to track Face And Screen Disable faces 3.3.10 Face Library You can import pictures from your PC, or use a snapshot directly. Fill out the picture’s information below it to add to the whitelist, uncategorized or blacklist database. - Page 32 You can preview the image here - 27 -...
-
Page 33: Access Control
You can check all the saved records here. 3.3.11 Access Control Basic Configurations Default Description Integration Mode Door Mode UI Refresh Delay (2-10s) User info Display Disable Option to display user’s info Temperature display Enable Option to display the temperature Save Snapshot Disable Option to save snapshot... -
Page 34: Error Message
3.3.12 Error Message You can customize your error message here. - 29 -... -
Page 35: Volume
Here you can adjust the volume settings, enable audio, or disable it. 3.3.14 Connecting V2 Pro to PC directly by Ethernet cable How to connect V2 Pro directly to your PC in case there is no network or during an emergency: 1. - Page 36 4. Type http://192.168.1.8 on your IE explorer or Chrome to open the webpage to manage your device. - 31 -...
-
Page 37: Desktop Management Terminal
4. Desktop Management Terminal 4.1 Setup Please install the ConfigTool for the AATSS V2 Pro on your PC. Installation steps: Download the ConfigTool, then install it as follows: - 32 -... - Page 38 - 33 -...
-
Page 39: Main Interface
4.2 Main Interface Here, you can see a list of all your AATSS V2 Pro devices, IP addresses, firmware versions and other details. You can apply updates to multiple devices through this terminal, as well as view data and adjust settings for individual devices. -
Page 40: Support
4.2.1 Support Click “support” to display software information. 4.2.2 Settings Click “Setting”. If there is more than one NIC, and devices do not show on the list, you need to change the IP address via "Select Network Adapter": 4.3 Batch Operation 4.3.1 Upgrade Firmware in Batch You can select multiple devices in the same network segment to upgrade the firmware. - Page 41 4.3.2 Change IP Configuration in Batch Select multiple devices to set the fixed IP address. Enter the starting gateway IP and other IP parameters, and the selected devices will be retrieved to configure the IP address. - 36 -...
-
Page 42: System Configuration In Batch
4.3.3 System Configuration In Batch Select devices to batch operate the following functions: Device Operation Reboot Open Door Virtual IP will be turned on when the VirtualIP Open Virtual IP system cannot find the device Close Virtual IP Close is the default setting Time Sync PC Time Sync PC time... -
Page 43: User
4.4 User 4.4.1 Add User Here you may add users to the whitelist, blacklist and uncategorized databases. - 38 -... -
Page 44: User Management
4.4.2 User Management Here you can edit user information. 4.4.3 Records Query You can find all records here. - 39 -... -
Page 45: Statistics
4.5 Statistics 4.5.1 Graphs Select one or more devices, then select a period of time (day, week, month), click “search”, and the total number of temperature scannings of the selected device during this period of time will be displayed in the line chart. 4.5.2 Live View This screen provides a live feed of all temperature screenings currently being conducted. -
Page 46: Maintenance
5. Maintenance Thermal infrared detection works best indoors. The AATSS V2 Pro is resistant to sunlight interference and can be used outdoors, however, please avoid direct sunlight on the device or the face of the person being screened when possible. We recommend a well shaded area for best performance. -
Page 47: Warranty
Operating System Linux Network Module Network Module Ethernet (Wi-Fi coming soon) Audio Audio 8W / 1R Speakers Relay Output 1 open door signal output (Dry contact) 1 RJ45 Ethernet socket INFRARED THERMAL MODULE Temperature Detection Distance 0.5M – 1M Measurement Resolution 0.018 °F Temperature Measurement Accuracy ≤... - Page 48 +1-866-204-2158 - 1 -...
Need help?
Do you have a question about the V2 Pro and is the answer not in the manual?
Questions and answers