Common Problems And Solutions - Feider Machines FBT420 Original Instructions Manual

Common problems and Solutions

Problem
Abnormal cutting and unable
to take in the materials
automatically
Uneven thickness of wood slices
The gasoline engine won't start
If the gasoline engine is running abnormally, please refer to the common
problem shooting in the gasoline engine manual. We strongly suggest that you
send the machine back to the agency for service.
Reason
The blade
1.
heavy wear .
Feeding
2.
material's diameter
exceeded the limit.
Incorrect
cutting clearance
Faulty Circuit
1.
gasoline engine
Running out
2.
gasoline, engine stop
automatically.
Lack of oil or too
3.
much oil.
Solution
is 1. Replace a blade.
2. Take out the material
and make it smaller.
Adjust the space of the
knives. The correct value
should be 0.5-1.5mm.
of Check the stop switch and
1.
wire connection.
of
Check oil level.
2.
Oil injection or oil release.
3.
13