Advertisement
Available languages
Available languages
INSTALLATION
REAR DOOR SUNSHADE
Installing the Clip
1.
Open the right rear door.
2.
Measure the clip installation positions on the
door sash of the right rear door and mark with a
felt-tip pen as shown.
3.
Using the cleaner included in this kit, thoroughly
clean the areas where the clips will attach.
Clean with
the cleaner.
Clean with
the cleaner.
80 mm
MARK
FRONT
Clean with
the cleaner.
80 mm
© Honda Access Corp. 2009
Clean with
the cleaner.
MARK
Align.
80 mm
MARK
FELT-TIP
PEN
RIGHT REAR
DOOR
MARK
30 mm
MARK
Clean with
the cleaner.
4.
Remove the adhesive backing from each clip.
5.
Align the edge of the clips with the marks on the
door sash, and attach the clips to the door sash
as shown.
•
Make sure to attach the clips in the correct
position and orientation.
•
Using the palm of your hand, fi rmly press the
clips against the door sash for more than 15
seconds.
•
Erase the marks on the door sash.
6.
Repeat the same procedure to install the clips
on the left side of the vehicle.
MARKS
5 ADHESIVE
BACKINGS
Remove.
FRONT
8719012G
5
<SECTION VIEW>
Align with the
curve end.
SMALL
TAB
LARGE
TAB
RIGHT REAR
DOOR
DOOR
GLASS
MARKS
5 CLIPS
8719022G
Advertisement
