Table of Contents
Advertisement
❹ Maintenance
4.1 I Emptying the fi lter bag
To maintain opti mal movement and sucti on capabiliti es, the bag should be empti ed of all debris as soon as it is half full.
• Remove the fi lter bag clamping clip
• Rotate the connector
• Remove the Velcro strips
• Open the zip
and remove the debris.
• To reinstall the bag, align the markings between the connector
place.
• Att ach the fi lter bag clamping clip
P280 - P380
Tip: A dry bag is easier to clean
It is easier to clean the bag when it is dry. Remove the bag and leave to dry before emptying.
Alternate between 2 fi lter bags so as not to temporarily stop operati on.
4.2 I Cleaning the in-line fi lter
• Disassemble the in-line fi lter assembly.
• Rinse the fi lter
in clean water.
• Repositi on by pressing down fi rmly.
4.3 I Storing and winterising
• Before storing the cleaner for the winter, empty all the water out (damage due to ice is not covered by the guarantee).
• Clean the whole cleaner and the hoses in clean water and leave to dry.
• Store in a dry place, protected from freezing temperatures and away from direct sunlight.
• Remove the universal fi tti ng from the pool wall : simultaneously unscrew and pull.
(P280 - P380) from the hose or the Velcro strips
unti l it is released from the hose aft er an audible click.
(P3900 Sport).
(P280 - P380) onto the hose or place the Velcro strips
and the cleaner's sucti on hose, then click it in
P3900 Sport
(P3900 Sport).
(P3900 Sport).
EN
14
Advertisement
Table of Contents
