Makita DCU180 Instruction Manual page 13

Installing the battery cartridge
1. Rotate the lock lever, and then open the cover of
the battery box.
1
2
► 1 . Lock lever 2. Cover
2. Align the tongue on the battery cartridge with the
slot on the battery box, and then slide the cartridge until
it locks in place with a little click. If you can see the red
indicator on the upper side of the button, battery car-
tridge is not locked completely.
1
► 1 . Battery cartridge
3. Insert the lock key in the place shown in the figure
as far as it will go.
1
► 1 . Lock key
NOTE: If the lock key is not inserted completely, the
machine does not work.
4. Close the cover of the battery box, and then rotate
the lock lever.
1
2
► 1 . Lock lever 2. Cover
Removing the battery cartridge
1.
Rotate the lock lever, and then open the cover of
the battery box.
2. Pull out the battery cartridge from the battery box
while sliding the button on the front of the cartridge.
1
► 1 . Button
3. Pull out the lock key.
4. Close the cover of the battery box, and then rotate
the lock lever.
13 ENGLISH