Installation (continued)
5b
Anchor installation
□
Drill a 7/32 in. hole at each mark on the ceiling, and insert
the anchors (CC) into the mounting surface.
□
Insert the Phillips screws (BB) through the track section (F),
and tighten to the anchors (CC).
6
Attaching the mounting plate to the track
Tighten the track mounting screws (A) to secure the track
□
section (F) to the mounting plate (B).
7
Connecting the canopy to the track
□
Twist the twist-lock connector (C) into the track section (F).
□
Secure the canopy (D) to the mounting plate (B) by tightening
the previously removed canopy screws (E).
□
When the twist-lock connector (C) is twisted into position on
the track section (F), make sure the two copper tabs on the
side of the twist-lock connector (C) align with the two copper
strips inside the track section (F). This is necessary to
maintain polarity.
8
Installing the bulb
□
Install the bulb (H) into the socket of the track head (G).
F
7
CC
BB
B
B
C
E
G
Please contact 1-877-527-0313 for further assistance.
F
A
F
D
H
HOMEDEPOT.COM