AEG RTB91431AW User Manual page 7

3.1 Dimensions
Overall dimensions ¹
H1 mm
W1 mm
D1 mm
¹ the height, width and depth of the
appliance without the handle and feet
Space required in use ²
H2 mm
W2 mm
D2 mm
² the height, width and depth of the
appliance including the handle, plus the
space necessary for free circulation of
the cooling air
* increased to 660 mm if the room
temperature is greater than 32°C
Overall space required in use ³
H2 mm
W3 mm
D3 mm
³ the height, width and depth of the
appliance including the handle, plus the
space necessary for free circulation of
850 the cooling air, plus the space necessary
to allow door opening to the minimum
595
angle permitting removal of all internal
equipment
635
3.2 Location
850
This appliance is not intended to be used
600*
as a built-in appliance.
In case of different installation from
690
freestanding respecting space required
in use dimensions, the appliance will
function correctly but energy
consumption might increase slightly.
To ensure appliance's best functionality,
you should not install the appliance in the
nearby of the heat source (oven, stoves,
radiators, cookers or hobs) or in a place
with direct sunlight. Make sure that air
can circulate freely around the back of
the cabinet.
850
This appliance should be installed in a
1020
dry, well ventilated indoor position.
1105
To ensure best performance, if the
appliance is positioned below an
W1
W3
W2
Refer to the installation
instructions for the
installation.
ENGLISH 7